780-918-0509 RE/MAX ELITE

How to pass your home inspection

Every home buyer wants the security of knowing that the home he is considering purchasing is good beneath the surface. That is, will the roof leak? What about the plumbing? Has the basement flooded? Ensuring that the areas listed below are in order will help you pass inspection with flying colors. Also, when you know what to look for, you can prevent little problems from growing into costly and unmanageable headaches.

Problem plumbing

Defective plumbing usually manifests with leaking and clogging. Looking under sinks and pipes can detect leaks. Water pressure can be determined by turning on all the faucets in the highest bathroom and then flushing the toilet. The sound of running water indicates undersized pipes. If dirty water appears when you turn on the faucet, it could indicate that the pipes are rusting.

Damp or wet basement

A white mineral deposit on the walls and basement floor indicates water seepage. A mildew odor might also be present. Sealing a crack in or around your basement foundation, depending on severity and location, runs from $300 - $1,000. To waterproof an average 3 bedroom home, is estimated at around $5,000 - $15,000.

Insufficient wiring & electrical

Your home should have a minimum of 100 amps service. It should be clearly marked and the wire should be copper. Octopus plugs indicate inadequate circuits and are a fire hazard. Cover plates on all junction boxes and outlets.

Faulty heating & cooling systems

The most common causes of poor heating are insufficient insulation and an inadequate or a poorly functioning heating system. A clean furnace, without rust on the heat exchanger, typically has a life span of 15-25 years. A cracked heat exchanger on a forced air gas system could emit deadly carbon monoxide into the home. Unrepairable, it must be replaced if damaged.

Roofing defects

Water seepage through the roof results from deterioration of the asphalt shingles (e.g. curling or splitting), or damage from a storm. When water is not properly directed through gutters and downspouts, or gutters leak, this could result in major internal problems.

Damp attic spaces

Aside from basement dampness, problems with ventilation, insulation and vapor barriers can cause water, moisture, mold and mildew to form in the attic. This can lead to premature wear of the roof, structure and building materials. The cost to fix this damage could easily run over $2,500.

Rotting wood

Rotting occurs from exposure to elements, and is most prevalent on doors, window frames, trim, siding, decks and fences.

Masonry work

Left unattended, smaller repairs can lead to problems with water and moisture penetration into the home which could lead to a chimney being clogged by fallen bricks or even a chimney which falls onto the roof.

Adequate security features

These basic safety features should be functioning properly: locks on windows and patio doors, dead bolts on the doors, smoke and carbon monoxide detectors on every level.

Structural/foundation defects

Investigate the underlying footing, basement and foundation to ensure structural integrity.

Keeping these items in mind as you walk through your home, will help you provide for any future costs and disappointments. A Real Estate Professional has many resources in place to assist you. They can recommend a professional inspector, repair services or any other housing related need you may have.

The data included on this website is deemed to be reliable, but is not guaranteed to be accurate by the REALTORS® Association of Edmonton.

MLS®, Multiple Listing Service®, and the associated logos are all registered certification marks owned by CREA and are used to identify real estate services provided by brokers and salespersons who are members of CREA. The trademarks REALTOR®, REALTORS® and the REALTOR® logo are controlled by The Canadian Real Estate Association (CREA) and identify real estate professionals who are members of CREA. Used under license.